Buying a Trailer Hub Cap

If you're looking to upgrade your trailer wheels or keep them clean and looking good, buying a new trailer hub cap might be the solution. These caps can add some personality to your trailer, and they'll also help protect your wheel nuts from rust and other damage. This company website has more details on buying a trailer hub cap.

Before you buy a hub cap, make sure it's the right size for your trailer. Look for a hub cap that's sized to fit your wheels and has enough studs to hold the hub in place. Some common sizes are 8 of 5/8'' studs, 8 of 3/4'' studs and 12 of 1/2'' studs.

You can get hub caps in different colors and styles, so it's important to pick one that matches your trailer. You'll also need to make sure it has a stud on it that matches your wheel studs.

Choosing the right trailer hubcap for your boat is easy to do when you know what you're doing. First, measure the stud diameter of your boat trailer's hub. Most 4 lug hubs have a 4" bolt circle and most 5 lug boat trailer hubs have a 4 1/2" bolt circle.

Once you've measured the stud diameter, measure the lug circle, too. You'll need to know the exact size of your hub, because the hubcap will be centered on it and the bearings will have to fit snugly inside.

Now that you have the right sized hubcap, it's time to install it. This is a simple process that doesn't require any special tools, so you can complete the job by yourself. It can take about an hour.

After installing your new hub, you may want to replace the dust cap or grease seal, too. These are a vital part of keeping your bearings lubed and in good shape, so it's a good idea to periodically inspect them for cracks. Click here for more info on trailer hubcaps near you.

There are a variety of different grease and oil caps for trailers, so you should be able to find something that fits your needs. Zinc-plated trailer grease/dust caps feature a "press-in" design and thick steel construction to ensure long-lasting durability. Grease caps with removable rubber center plugs can be used with hubs or spindles that have a built-in grease zerk fitting.

These caps can be used with all types of wheels, including aluminum and steel ones. They can be a little hard to install, though, since they have to be adjusted properly before the wheel goes on.

You can also find grease seals that don't have a stud on them, so they'll slip right onto the bearings. These can be tricky to remove, but a screwdriver or hammer can loosen them.

If you're looking for a more affordable way to spruce up your trailer, consider getting a trailer bearing kit. These kits contain pre-greased bearings and seals, plus lug nuts and cotter pins.

The best hub and bearing kits for trailers are those that are made by quality brands that have been around for a while. These companies are known for producing high quality, durable parts that you can trust to work and last. Check out this blog to get enlightened on this topic: https://en.wikipedia.org/wiki/Hubcap.